Some notes on TPE dolls

1. Doll material is made of a new type of polymer material TPE, also known as Cyberskin (virtual skin). This material is non-toxic and tasteless, its hardness is below Shore A0, and its tensile strength is more than 6 times. It is smooth, delicate, soft and elastic like real skin. The materials meet the relevant safety standards stipulated by the state and have no toxic effects on the human body and the environment.


2. The sex doll has various metal joints inside the body, which can make various postures within a certain range. During the production, the internal skeletal joints are fixed, and there are fixed holes in the soles of the feet and calves, which are slightly modified after treatment.
3, the doll can not use sharp equipment to scratch the surface of the model, can not force kneading to avoid damage to the surface of the skin, affecting the use of time and beauty.


4, should avoid wearing easy to fade or poor coloring clothing, so as not to pollute the model, because the clothing wear and dyed doll will be difficult to wash, please be careful here.
5, can not be put together with substances containing ink, such as newspapers and magazines. Avoid placing it in dark clothing or leather fabrics containing oil-soluble pigments to avoid contaminating the doll.
6, can not put the doll in a direct sunlight environment for a long time, so as not to cause the material to age, affecting the use of time.
7. The doll pose is a straight posture when it leaves the factory. It is not possible to put the doll in a difficult and curved position for a long time, so as to prevent the deformation and damage of a certain part for a long time due to pulling.
8. If there is an indentation or a smear on the surface of the doll for a long time, use a clean and white cloth to wet with water, then use a hot air blower to blow the surface of the cloth. After a period of time, the indentation will disappear.


9. After a long time of display, the surface area of the doll has dust and dirt, which can be cleaned with ordinary detergents, such as washing powder. In case of stubborn stains, you can use the washing powder dry powder and a small amount of water to wash it directly, which is easier to remove. However, the use of fingernails should be avoided to scratch the surface of the doll. After washing, after the surface water is dry, apply the hand powder (which can be replaced by ordinary hazelnut powder) evenly on the surface layer. After washing, the surface is smooth as before, and the hand feels fine. Recommendation: Regularly clean and maintain as appropriate.
10. If there is small area damage on the surface of the doll, it can be glued with the glue. Clean the damaged surface first, then apply a layer of glue evenly on the two cut faces, then bond the two cut faces. Together, finally, apply a thin layer of glue on the surface, and wait for about half an hour to dry the glue. If you have other technical problems, you can contact the seller or the manufacturer directly. The manufacturer will generally provide processing technology as appropriate.

click here: sex doll

Leave a Reply