The process of using a physical doll

How to use physical dolls

It can be roughly divided into the following three steps:

Before, during, and after use


1,Before using a physical doll

Physical dolls should be cleaned.

2,When using a physical doll

To keep the private parts of the physical doll with sufficient lubrication, lubricant must be used. If lubricant is not used, the internal lubrication of the physical doll is not enough, which may lead to the breakage of the private parts of the physical doll after use. If you wear a condom that is lubricated enough, that’s fine.

3,Run out of physical dolls

The private parts of the doll should be cleaned with clean water, and the whole body of the doll should be cleaned. After sterilizing the doll, wash it with warm water, then dry the inside and surface of the doll with a towel, or let it dry naturally, then keep it for future use.


Matters needing attention

  1. The environment should be kept away from direct sunlight and humidity. The ideal storage temperature is 5-35° C
  2. Do not soak in the water for a long time when you are clear
  3. The joints in the doll’s body can be bent, but the Angle should not be too large. Please use gentle force when bending
  4. When moving the doll, do not pull the limbs and head, but be sure to hold the trunk
  5. The doll is customized with advanced soft glue. After a long time, there will be subtle oil seepage on the surface, which belongs to normal imagination
  6. It is recommended to bathe the doll every 20 days. Please gently wipe the doll surface with soapy water (soap, detergent, shampoo, shower gel), and then apply talcum powder after washing and drying